802.11n Supporting Setting on Wireless LAN Controller
802.11n is activated on Cisco WLC or WiSM only when WPA2 setting is selected , if you select WPA+WPA2 setting then you can get only 802.11a/b/g , though your Access Point support 802.11n (example Cisco Access Point 1252)
Hi, This is Haowen. I try to configure cisco-1252 to ACS 4.2 for a RADIUS environment, but the client cannot access network via AP and RADIUS. It will be OK with cisco-1242. Should I config more with 1252? my mail is wanghaowen@neusoft.com. great thanks for your support and my best regards!
I try to configure cisco-1252 to ACS 4.2 for a RADIUS environment, but the client cannot access network via AP and RADIUS. meizu mx5 xiaomi redmi note 2 meizu m2
3 comments:
Hi, This is Haowen. I try to configure cisco-1252 to ACS 4.2 for a RADIUS environment, but the client cannot access network via AP and RADIUS. It will be OK with cisco-1242. Should I config more with 1252? my mail is wanghaowen@neusoft.com. great thanks for your support and my best regards!
By accidental to our Christmas collection, you will advice buy food, accouterment and toys for these beggared people Cheap Tera Gold
cheap tera gold
rs
I try to configure cisco-1252 to ACS 4.2 for a RADIUS environment, but the client cannot access network via AP and RADIUS.
meizu mx5
xiaomi redmi note 2
meizu m2
Post a Comment